The syllabus has two sections: Section-I covers General Aptitude, Port Awareness and IT, and Section-II is Technical, with Modules 1 to 10. Below you can find the section-wise structure, the module-wise topics, the steps to download the PDF and the direct links.
Cochin Port Executive Engineer Civil Syllabus 2026 Overview
The table below gives the key details of the Cochin Port written examination syllabus for the Executive Engineer (Civil), Class-I post, as printed in the syllabus PDF.
| Particulars | Details |
|---|---|
| Organization | Cochin Port Authority |
| Post Name | Executive Engineer (Civil), Class-I |
| Stage | Written Examination |
| Syllabus Status | Released |
| Section-I | General Aptitude, Port Awareness and IT |
| Section-II | Technical |
| Format | |
| Official Website | cochinport.gov.in |
Cochin Port Executive Engineer Civil Exam Structure 2026
The Cochin Port Executive Engineer (Civil) written examination syllabus has two sections. Section-I has four modules and Section-II (Technical) has ten modules. The syllabus PDF does not give the number of questions, the marks or the exam duration.
| Section | Modules |
|---|---|
| Section-I: General Aptitude, Port Awareness and IT | Module 1: Quantitative Aptitude and Engineering Mathematics; Module 2: Reasoning; Module 3: Port and Maritime Awareness; Module 4: Computers and IT |
| Section-II: Technical | Module 1: Structural Engineering and Design; Module 2: Port, Harbour and Coastal Engineering; Module 3: Geotechnical and Foundation Engineering; Module 4: Hydraulics, Hydrology and Water Resources; Module 5: Quantity Surveying, Estimation, Specifications and Rate Analysis; Module 6: Environmental and Public Health Engineering; Module 7: Transportation Engineering; Module 8: Surveying, Geomatics and Hydrographic Survey; Module 9: Construction Materials, Technology and Quality Control; Module 10: Construction Management, Contracts and Procurement |
Cochin Port Executive Engineer Civil Section-I Syllabus 2026
Section-I covers General Aptitude, Port Awareness and IT. It includes topics such as the Major Port Authorities Act 2021, the Sagarmala Programme, AutoCAD and awareness of generative AI. The topics for each module are listed below.
| Module | Topics |
|---|---|
| Module 1: Quantitative Aptitude and Engineering Mathematics | Arithmetic, percentages, ratio, data interpretation; matrices and linear equations, calculus basics, probability and statistics (mean, standard deviation, normal distribution), numerical integration by trapezoidal and Simpson's rule |
| Module 2: Reasoning | Verbal, logical and non-verbal reasoning |
| Module 3: Port and Maritime Awareness | Major Port Authorities Act 2021; Indian Ports Act 1908; Sagarmala Programme; Maritime India Vision 2030; PM Gati Shakti; major and non-major ports of India, port-led development, PPP models in ports; Tariff fixation Guidelines by GoI; General knowledge and current affairs |
| Module 4: Computers and IT | Office automation (Word, Excel incl. formulas and analytics, PowerPoint); web technologies, networks, IoT in office management; e-office, e-procurement and GeM portals; GIS and GPS basics; AutoCAD and civil engineering software (STAAD Pro, ETABS, MS Project/Primavera); awareness of generative AI |
Cochin Port Executive Engineer Civil Technical Syllabus 2026
Section-II (Technical) of the Cochin Port Executive Engineer (Civil) syllabus has ten modules, from Structural Engineering and Design to Construction Management, Contracts and Procurement. The topics for each module are listed below.
Module 1: Structural Engineering and Design
- Mechanics and solid mechanics: System of forces, free-body diagrams, equilibrium; bending moment and shear force; simple bending, flexural and shear stresses, shear centre; torsion; transformation of stress; buckling of columns; combined and direct bending stresses.
- Structural analysis: Determinate and indeterminate structures by force and energy methods; trusses, arches, beams, cables and frames; slope deflection and moment distribution; influence lines; stiffness and flexibility methods; free vibration of undamped SDOF systems.
- Concrete structures: Working stress and limit state design; beams, slabs, columns, footings, retaining walls, water tanks; bond and development length; prestressed concrete beams and losses; durability of concrete in marine exposure.
- Steel structures: Tension and compression members, beams and beam-columns, column bases; bolted and welded connections; plate girders and trusses; plastic analysis of beams and frames.
- Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.
- Masonry and loads: Design of masonry structures; dead, live, wind and seismic loads, earthquake-resistant design principles.
Module 2: Port, Harbour and Coastal Engineering
- Harbour planning: Classification of ports and harbours; site selection; harbour layout; channel and turning circle design; navigational aids; port capacity and berth occupancy.
- Marine structures: Breakwaters (rubble mound and vertical) (Hudson/Van der Meer), composite/caisson breakwaters; seawalls & revetments - armor sizing, filters, geotextiles; groynes & nearshore structures; wharves, quays, jetties, piers, dolphins and berthing structures; fenders, bollards and mooring systems; dry docks and slipways; berthing and mooring forces, design and construction of reinforced soil retaining walls, coping levels, apron components; IWT structures - RCC jetties, pontoon systems, gangways.
- Dredging and reclamation: Capital and maintenance dredging, dredger types, disposal of dredged material, land reclamation.
- Shore protection and maintenance: Seawalls, groynes, revetments; corrosion protection of marine structures (cathodic protection, coatings); condition assessment and rehabilitation of port structures, coastal processes - erosion, accretion, beach nourishment.
- Port infrastructure: Container yards, storage sheds, port roads and rail sidings, hinterland connectivity, port environmental management.
Module 3: Geotechnical and Foundation Engineering
- Soil mechanics: Soil formation, soil types, composition, specific gravity, water content, shape and size, grain size distribution curves, relative density, consistency of soils, unified and IS soil classification systems, field identification tests, principle of effective stress, direct shear test, unconfined compression test, triaxial shear test (consolidated drained, consolidated undrained, unconsolidated undrained), vane shear test, shear strength of clays and sands, compaction (principles, tests, factors, field compaction, techniques), compressibility characteristics, time rate of consolidation, coefficient of consolidation, curve fitting techniques, settlement, secondary consolidation, 3-D consolidation, vertical sand drains, earth pressure theories, earth pressure due to surcharge, retaining walls, stability analysis, proportioning and design of retaining walls.
- Foundations: Sub-surface investigation (boreholes, SPT, CPT, plate load test); earth pressure theories (Rankine, Coulomb); slope stability; Boussinesq stress distribution; bearing capacity (Terzaghi, Meyerhof); correlations between penetration resistance and soil design parameters; types of foundations and selection criteria; load transfer in shallow and deep foundations; settlement analysis of footings and rafts; design and testing of shallow and deep foundations; earthen embankments; principles of ground modifications; sheeting and bracing of foundation excavation; pile foundations - types, methods of construction, pile capacity, capacity and settlement of pile groups, proportioning of piles.
- Marine and ground improvement: Foundations on soft marine clays; sheet piles and diaphragm walls; ground improvement (preloading, vertical drains, stone columns); engineering geology basics.
Module 4: Hydraulics, Hydrology and Water Resources
- Fluid mechanics: Fluid properties and statics; continuity, momentum and energy equations; laminar and turbulent flow; flow in pipes and pipe networks; boundary layer; lift and drag.
- Hydraulics: Flow measurement in pipes and channels; dimensional analysis and model studies; open channel flow, specific energy, critical flow, hydraulic jump, gradually varied flow; hydraulic machines (pumps and turbines) and hydropower.
- Hydrology: Hydrologic cycle, precipitation, infiltration, unit hydrograph, flood estimation and routing, groundwater and well hydraulics, Darcy's law.
- Irrigation: Canals, gravity dams, spillways, weirs on permeable foundations, cross-drainage works.
Module 5: Quantity Surveying, Estimation, Specifications and Rate Analysis
- Types of estimates (preliminary, detailed, revised, supplementary); methods of estimation for buildings, roads, water supply, drainage and marine works; estimation with latest project management tools and network analysis.
- Mode of measurement; recording measurements in the Measurement Book; check measurement.
- Rate analysis of items, units of measurement, procedure of rate analysis; CPWD Specifications, Schedule of Rates and Analysis of Rates; lead and lift, cost index, escalation.
- Types of specifications, general specifications and technical specifications.
- Bar bending schedules; valuation of buildings and depreciation; billing (running account and final bills), variations and deviations.
Module 6: Environmental and Public Health Engineering
- Water supply: Water quality standards, testing of water, demand estimation, treatment units, distribution system design, water distribution networks.
- Wastewater: Sewerage design, quantity of sewage, primary and secondary treatment, effluent standards, sludge disposal, reuse of treated sewage; storm water drainage.
- Solid waste and air: MSW generation, collection, treatment and disposal; air pollutants, control and AQI; noise pollution.
- Environmental management: EIA, CRZ notification and coastal environmental clearance, building plumbing and sanitation.
Module 7: Transportation Engineering
- Highways: Planning and construction methodology, alignment and geometric design; traffic surveys and controls; flexible and rigid pavements as per CBR and IRC design methods; construction of various layers, earthwork, WBM, GSB, WMM, bituminous layers, joints in rigid pavements, hot mix plants; pavement maintenance.
- Traffic: Traffic studies, flow-speed-density relationships, signal design (Webster), intersections, highway capacity.
- Railways: Track components, gauges, speed and cant, points and crossings, port rail sidings.
- Airports and tunnels: Runway orientation, length and corrections, taxiway design; tunnelling methods, ventilation and drainage.
Module 8: Surveying, Geomatics and Hydrographic Survey
- Principles and classification of surveys; measurement of distances, elevation and directions; map preparation errors and their adjustment; chain, compass and plane table surveying; levelling and trigonometric levelling; contouring; survey layout for culverts, canals, bridges, road/railway alignment and buildings; setting out of curves.
- Theodolite traversing, triangulation, tacheometry; total station; horizontal and vertical curves; setting out works.
- Photogrammetry; satellite images and aerial photographs, remote sensing, 3-D modelling, GIS and GPS/DGPS.
- Hydrographic surveying: Metocean parameters - waves, tides, currents, storm surge; wave spectra - Pierson-Moskowitz (PM)/Joint North Sea Wave Project (JONSWAP); sediment transport and littoral drift; shoreline change modelling; hydrographic surveys - SBES/MBES; topographic surveys - DGPS/Total Station; geophysical surveys - SSS, sub-bottom profiler; survey instruments - ADCP, wave rider buoy, tide gauges.
Module 9: Construction Materials, Technology and Quality Control
- Materials: Stone, brick, lime, cement, aggregates, timber, steel, bitumen, paints, polymers, geosynthetics; properties and tests.
- Concrete technology: Mix design, admixtures, high-performance and special concretes, non-destructive testing (rebound hammer, UPV), concrete for marine environment.
- Construction technology: Formwork, scaffolding, construction equipment (earthmoving, piling, cranes, dredgers), pre-engineered and precast construction, building services.
- Quality and maintenance: Quality assurance plans, inspection and test plans, third-party inspection; maintenance and repair of buildings, roads, water supply and drainage work; distress diagnosis and retrofitting.
Module 10: Construction Management, Contracts and Procurement
- Planning: Project life cycle; PERT and CPM, crashing, resource levelling; bar charts and S-curves; project monitoring and earned value.
- Contracts: Types of contracts (item rate, percentage rate, lump sum, EPC, HAM, PPP); CPWD Works Manual; tendering and e-tendering; earnest money, security money, retention money, measurement book, cash book, bills, administrative and technical sanction, quality control, productivity, operation cost; land acquisition; labour safety and welfare; valuation terms and the role of a valuer, capitalised value, years purchase, sinking fund, depreciation, types of values; Indian Contract Act 1872; Arbitration and Conciliation Act 1996; dispute resolution.
- Procurement and finance: General Financial Rules 2017 (works and procurement chapters); GeM, earnest money and performance guarantee; cost estimation and project appraisal basics.
- Safety and ethics: Construction safety, engineering ethics, standards and quality practices.
How to Download Cochin Port Executive Engineer Civil Syllabus 2026 PDF?
Cochin Port Authority has posted the Executive Engineer (Civil) syllabus as "Syllabus - EE(Civil)" on its Careers page. To download the PDF, follow these steps.
- Visit the official website at cochinport.gov.in.
- Open the Careers page.
- Click the "Syllabus - EE(Civil)" link.
- Download the syllabus PDF and save it.
Cochin Port Executive Engineer Civil Syllabus 2026 Important Links
The table below has the direct links to the Cochin Port Executive Engineer (Civil), Class-I written examination syllabus PDF and the Cochin Port Authority Careers page.
| Important Links | Access Link |
|---|---|
| Cochin Port EE Civil Syllabus PDF | Download Cochin Port EE Civil Syllabus PDF |
| Cochin Port Careers Page | Open Cochin Port Careers Page |
| Official Website | Visit Cochin Port Authority Website |
Have a question about this exam? Ask about dates, admit card or syllabus and get replies.
Ask a Question →