The Haryana Public Service Commission (HPSC) has released the Scheme/Pattern of Exam for the post of Assistant Director Industrial Safety and Health in the Labour Department, Haryana, against Advertisement No. 26/2022 (published on 14.09.2022), vide an announcement dated 11.08.2026. This article covers the complete HPSC Assistant Director Industrial Safety and Health syllabus 2026 and exam pattern, including the Subject Knowledge Test structure, marks weightage, interview details, and the full subject-wise topic list, exactly as notified by HPSC. Candidates preparing for this exam should go through the syllabus and pattern together, since the final merit depends on how marks from both stages are combined.
Click To Check HPSC Assistant Director Syllabus 2026
HPSC Assistant Director Syllabus and Exam Pattern 2026 - Overview
Advertisement
| Particulars | Details |
|---|---|
| Conducting Body | Haryana Public Service Commission (HPSC) |
| Post Name | Assistant Director Industrial Safety and Health, Labour Department, Haryana |
| Advertisement Number | 26/2022 |
| Advertisement Published On | 14.09.2022 |
| Selection Stages | Subject Knowledge Test + Interview |
| Total Marks (Subject Knowledge Test) | 150 |
| Exam Duration | 3 hours |
| Question Paper Type | Subjective type |
| Medium of Question Paper | English |
| Minimum Qualifying Marks (Test) | 35% |
| Weightage – Subject Knowledge Test | 87.5% |
| Weightage – Interview | 12.5% |
| Official Website | https://hpsc.gov.in/ |
HPSC Assistant Director Selection Process 2026
As per the official announcement, selection for the post of Assistant Director Industrial Safety and Health is a two-stage process:
- Subject Knowledge Test: A written, subjective-type test of 3 hours duration carrying 150 marks. The question paper will be set in English.
- Screening for Interview: Only candidates who secure a minimum of 35% marks in the Subject Knowledge Test are called for the interview/viva-voce.
- Number of Candidates Called for Interview: The Commission will call candidates for interview up to 3 times the number of advertised posts, including bracketed candidates (candidates tied at the cut-off), provided they have secured the minimum qualifying cut-off of 35%.
- Interview/Viva-Voce: Shortlisted candidates appear for the interview stage.
- Final Merit List: The final merit list is prepared by adding the marks of the Subject Knowledge Test and the Interview, weighted at 87.5% and 12.5% respectively.
Also Read: HPCL Junior Executive Admit Card 2026
HPSC Assistant Director Exam Pattern 2026
Subject Knowledge Test Pattern
| Component | Duration | Total Marks | Question Type | Weightage in Final Merit |
|---|---|---|---|---|
| Subject Knowledge Test | 3 hours | 150 | Subjective | 87.5% |
Qualifying criteria: A candidate must secure a minimum of 35% marks in the Subject Knowledge Test to be eligible for the interview. Category-wise (UR/EWS/OBC/SC/ST) qualifying percentages are not specified in the official notification.
HPSC Assistant Director Syllabus 2026
The syllabus for the Subject Knowledge Test, as enclosed with the official announcement, is divided into nine broad sections covering skill development, academic management, engineering fundamentals, and core technical subjects. Each section is detailed below exactly as notified.
1. National and International Scenario of Skill Development
- Vocational Education System in India
- Current National Policy on Skill Development in India
- Objective and Need for Skill Development in India
- Recommendations of various Committees on Vocational Education
- Scope of Skill Development
2. Academic and Administrative Management
- Organisation structure of Government ITIs
- Reporting systems, reporting authorities, and General Administration
- SWOT analysis, vision and mission, goals, strategic planning, internal/external environment management, resource mobilization, library management, maintenance of academic facilities
- Problem-solving techniques, personal management, value analysis, faculty norms
3. Skill Development Schemes
- Various Skill Development Schemes run by Central and State Government, including the Craftsmen Training Scheme
- Pradhan Mantri Kaushal Vikas Yojana (PMKVY), National Skill Qualification Framework (NSQF), State Skilling Schemes
- Crafts Instructor Training Schemes (CITS)
- National Apprentice Promotion Schemes (NAPS)
- SANKALP Scheme, STRIVE Scheme
4. Engineering Mechanics and Engineering Drawing
- Force and system of forces, equilibrium of rigid bodies, free body diagram, Lami's theorem, laws of Coulomb friction, equilibrium of bodies involving dry friction, belt friction, centre of gravity and moment of inertia
- Stress and strain: concept of stress and strain, simple stresses (tensile, compressive, shear), bending and torsion, stress-strain curves, elastic constants
- Engineering Graphics/Technical Drawing: drawing equipment and use of instruments, conventions in drawing practice, dimensioning, scales
- Theory of projection of planes and solids, orthographic projection
5. Fundamentals of Thermal Science
- Introduction to thermodynamics, properties, forms of energy, thermodynamic systems, steady flow systems
- Types of work, thermodynamic processes, laws of thermodynamics, Carnot theorem
- Concept of enthalpy and entropy
- Introduction to I.C. Engines: two-stroke and four-stroke S.I. and C.I. engines, Otto cycle, Diesel cycle
- Basic idea of Refrigeration and Air Conditioning cycle
6. Basic Knowledge on Workshop Science
- Measuring instruments and gauges, introduction to manufacturing processes, basic terminology used, material properties and their application, different engineering materials, properties, nomenclature, basics of heat treatment
- Fitting: introduction, tools used in fitting, measuring and marking, sawing, filing, tapping and die, introduction to drills
- Welding: brief introduction, electric arc, gas welding process and equipment, soldering and brazing process, types of sheets (ferrous/non-ferrous), standard sheet sizes and their measurement, tools used in sheet metal
- Metal Cutting: introduction, classification of machine tools and cutting tools, basic operations on lathe, drilling, shaper, milling, cutting tool material, work-holding devices, cutting parameters (speed, feed, and depth of cut)
- Casting: pattern types, moulding sand and its properties, casting process and defects
7. Basic Electrical Science
- Network Laws and Theorems: network laws for D.C. networks – Kirchhoff's laws, network elements, Superposition theorem, Thevenin's and Norton's theorems, Maximum Power Transfer theorem
- Single Phase A.C. Circuits: single-phase EMF generation, form factor, peak factor, RMS value, average value, phasor diagram, resistive, inductive and capacitive circuits, A.C. series and parallel circuits, analysis of simple RLC-series circuits, resonance, Q factor, Three Phase A.C. circuits (general relations)
- Magnetic Circuits and Transformers: analogy between electric and magnetic circuits, magnetic circuits, B-H curve, hysteresis loop, inductances in series and parallel, hysteresis and eddy current losses
- Transformers – constructional details, EMF equation, rating and phasor diagram on no-load and loaded conditions
- Electrical Machines: three-phase induction motors – construction, principle of working and their applications; Electrical Instruments: basic principles of moving iron, PMMC, dynamometer and induction type instruments, torque equation, dynamometer type wattmeter
8. Basic Electronics & Communication Science
- Electronics instruments: role and importance of general-purpose test instruments, CRO, CRT, semiconductor diodes and applications, review of PN junction diode, V-I characteristics, ideal diodes, LED, tunnel diode, photodiode
- Halfwave, fullwave and bridge rectifiers, passive filters, regulators, line regulation and load regulation, Zener diode as voltage regulator, concept of switched mode power supply (SMPS), Bipolar Junction Transistor, FET, MOSFET
- Operational Amplifiers, applications of op-amp as summing amplifier, differentiator and integrator; Digital Electronics: number system and logic gates, NAND and NOR as universal gates, SR and JK flip-flops
- Introduction to Computers: generation of computers, characteristics and classifications of computers, components of computers, types of memory, computer software and their types, operating system, algorithm and flow chart
- Computer Networks & Communication: LAN, MAN, WAN, network topologies, modes of data communication, introduction to internet and its safeguard, router, switches, hub, bridges
9. Civil
- Surveying instruments and their uses, various civil engineering surveys, building by-laws, properties and tests on construction materials like bricks, cement, coarse aggregate, steel reinforcement
- Units of different fluid properties, type of fluid and types of flow, flow measurement
- Construction management techniques like bar chart, milestone, network CPM/PERT, construction equipment, notice inviting tender, administrative approval, technical sanction, specification
- Tests on water and waste water, Environment Protection Act, sources of air pollution, National Clean Air Programme
- Types of dams and canals, rainfall measurement, safe bearing capacity of soil, methods of building estimates, forms used in public works department
Also Read: Mizoram PSC LDE Exam Date 2026
How to Prepare for the HPSC Assistant Director Exam 2026
- Start with the official syllabus: Since the paper is subjective and covers nine distinct sections, list out every topic from the syllabus above and track your preparation against it rather than relying on generic engineering revision material.
- Prioritize the technical core subjects: Engineering Mechanics, Thermal Science, Workshop Science, Electrical Science, Electronics & Communication, and Civil form the bulk of the syllabus – allocate more study time to these compared to the administrative and policy-based sections.
- Don't skip the skill-development and administration sections: Topics like PMKVY, NSQF, CITS, NAPS, SANKALP, and STRIVE, along with ITI academic and administrative management, are distinct sections in the syllabus and should be prepared separately using current government scheme documents.
- Practice subjective, descriptive writing: Since the Subject Knowledge Test is subjective in nature, practice writing structured, point-wise answers within a 3-hour time frame rather than only solving objective-type questions.
- Revise using standard engineering textbooks: For core sections like Engineering Mechanics, Thermal Science, Electrical Science, and Electronics, refer to standard diploma/degree-level engineering textbooks that match the topics listed in the official syllabus.
- Track the 35% qualifying threshold: Since only candidates crossing the 35% cut-off are considered for interview calls (up to 3 times the number of posts), aim to build a comfortable margin above this threshold across all sections rather than just clearing it.
HPSC Assistant Director Syllabus 2026 - Important Links
- HPSC Assistant Director Syllabus PDF: Check Here
- HPSC Official Website: hpsc.gov.in
