The Haryana Public Service Commission (HPSC) announced the scheme and syllabus for the Safety Officer in HPGCL, Power Department, Haryana (Advertisement No. 05/2025) on 28 September 2026. The selection has two stages: a 150-mark, 3-hour subjective Subject Knowledge Test with 87.5% weightage, and an interview with 12.5% weightage. Candidates need at least 35% in the test to be called for the interview.
Direct link to Check HPSC Safety Officer Syllabus 2026
HPSC Safety Officer Syllabus 2026 - Quick Overview
| Detail | Information |
|---|---|
| Organisation | Haryana Public Service Commission (HPSC), Panchkula |
| Post | Safety Officer |
| Department | HPGCL, Power Department, Haryana |
| Advertisement No. | 05/2025 (published 26.06.2025) |
| Announcement date | 28 September 2026 |
| Stages | Subject Knowledge Test and Interview |
| Official Website | hpsc.gov.in |
HPSC Safety Officer Exam Pattern
Stage 1: Subject Knowledge Test
| Parameter | Details |
|---|---|
| Duration | 3 hours |
| Total marks | 150 |
| Type of paper | Subjective |
| Language | English |
| Minimum marks for interview | 35% |
| Candidates called for interview | 3 times the advertised posts, including bracketed candidates, if any, provided they secure the 35% cut-off |
| Weightage | 87.5% |
Stage 2: Interview
The interview carries 12.5% weightage. Interview marks are not stated in the announcement.
Important Notes from HPSC
- Attendance at each stage is mandatory.
- The final merit list is prepared by adding the marks of the Subject Knowledge Test and the interview.
HPSC Safety Officer Syllabus 2026 - Subject-wise Topics
The official syllabus has nine sections. Topics are listed as published by HPSC.
1. National and International Scenario of Skill Development
- Vocational Education System in India
- Current National Policy on Skill Development in India
- Objective and need for skill development in India
- Recommendations of various committees on vocational education
- Scope of skill development
2. Academic and Administrative Management
- Organisation structure of Government ITIs
- Reporting systems, reporting authorities and general administration
- SWOT analysis, vision and mission, goals, strategic planning, internal and external environment management, resource mobilisation, library management, maintenance of academic facilities
- Problem-solving techniques, personal management, value analysis, faculty norms
3. Skill Development Schemes
- Central and State Government schemes such as the Craftsmen Training Scheme
- Pradhan Mantri Kaushal Vikas Yojana (PMKVY), National Skill Qualification Framework (NSQF), State skilling schemes
- Crafts Instructor Training Schemes (CITS)
- National Apprentice Promotion Scheme (NAPS)
- SANKALP Scheme, STRIVE Scheme
4. Engineering Mechanics and Engineering Drawing
- Force and system of forces, equilibrium of rigid bodies, free body diagram, Lami's theorem
- Laws of Coulomb friction, equilibrium of bodies involving dry friction, belt friction
- Centre of gravity and moment of inertia
- Stress and strain: simple stresses (tensile, compressive, shear, bending and torsion), stress-strain curves, elastic constants
- Engineering graphics and technical drawing: drawing equipment and instruments, conventions, dimensioning, scales
- Theory of projection of planes and solids, orthographic projection
5. Fundamentals of Thermal Science
- Introduction to thermodynamics, properties, forms of energy, thermodynamic systems, steady flow systems
- Types of work, thermodynamic processes, laws of thermodynamics, Carnot theorem
- Concept of enthalpy and entropy
- I.C. engines: two-stroke and four-stroke S.I. and C.I. engines, Otto cycle, Diesel cycle
- Basic idea of refrigeration and air conditioning cycle
6. Basic Knowledge of Workshop Science
- Measuring instruments and gauges, introduction to manufacturing processes, basic terminology
- Materials: engineering materials, properties, nomenclature, basics of heat treatment
- Fitting: tools, measuring and marking, sawing, filing, tapping and die, introduction to drills
- Welding: electric arc and gas welding processes and equipment, soldering and brazing, types of sheets (ferrous and non-ferrous), standard sheet sizes, sheet metal tools
- Metal cutting: classification of machine tools and cutting tools, basic operations on lathe, drilling, shaper, milling, cutting tool material, work-holding devices, cutting parameters (speed, feed, depth of cut)
- Casting: pattern types, moulding sand and its properties, casting process and defects
7. Basic Electrical Science
- Network laws and theorems: Kirchhoff's laws, network elements, superposition theorem, Thevenin's and Norton's theorems, maximum power transfer theorem
- Single-phase A.C. circuits: EMF generation, form factor, peak factor, rms and average value, phasor diagram, resistive, inductive and capacitive circuits, series and parallel circuits, RLC series circuits, resonance, Q factor; three-phase A.C. circuits (general relations)
- Magnetic circuits and transformers: analogy between electric and magnetic circuits, B-H curve, hysteresis loop, inductances in series and parallel, hysteresis and eddy current losses
- Transformers: construction, EMF equation, rating, phasor diagram on no-load and loaded conditions
- Electrical machines and instruments: three-phase induction motors (construction, working, applications); moving iron, PMMC, dynamometer and induction type instruments, torque equation, dynamometer type wattmeter
8. Basic Electronics and Communication Science
- Electronic instruments: general-purpose test instruments, CRO, CRT, semiconductor diodes and applications, PN junction diode, V-I characteristics, ideal diodes, LED, tunnel diode, photodiode
- Half-wave, full-wave and bridge rectifiers, passive filters, regulators, line and load regulation, Zener diode as voltage regulator, SMPS concept, BJT, FET, MOSFET
- Operational amplifiers: summing amplifier, differentiator and integrator; digital electronics: number systems, logic gates, NAND and NOR as universal gates, SR and JK flip-flops
- Introduction to computers: generations, characteristics and classification, components, types of memory, software and its types, operating system, algorithm and flow chart
- Computer networks and communication: LAN, MAN, WAN, network topologies, modes of data communication, internet and its safeguards, router, switches, hub, bridges
9. Civil
- Surveying instruments and uses, civil engineering surveys, building by-laws, properties and tests on construction materials (bricks, cement, coarse aggregate, steel reinforcement)
- Units of fluid properties, types of fluid and flow, flow measurement
- Construction management techniques: bar chart, milestone, network CPM/PERT, construction equipment, notice inviting tender, administrative approval, technical sanction, specification
- Tests on water and waste water, Environment Protection Act, sources of air pollution, National Clean Air Programme
- Types of dams and canals, rainfall measurement, safe bearing capacity of soil, methods of building estimates, forms used in the public works department
Points to Note About the Syllabus
- The published syllabus has no section titled with safety laws or industrial safety. Prepare strictly from the nine sections above and check with HPSC if you need clarification.
- Weightage of each section and the number of questions are not available in the announcement.
Recruitment Details (From Third-Party Coverage of Advt. No. 05/2025)
The following points come from job portals reporting on the June 2025 advertisement, not from the announcement above. Verify them on hpsc.gov.in.
| Detail | Reported information |
|---|---|
| Vacancies | 1 post |
| Application window | 30 June to 20 July 2025 |
| Age limit | 18 to 42 years |
| Qualification | Engineering or technology degree with at least 2 years' supervisory factory experience, or a Physics or Chemistry degree with at least 5 years' supervisory factory experience |
Important Dates
| Event | Date |
|---|---|
| Advertisement published | 26 June 2025 |
| Scheme and syllabus announced | 28 September 2026 |
How to Prepare for the HPSC Safety Officer Test
- Print the official syllabus and mark each of the nine sections.
- Practise long-form written answers, since the paper is subjective. Time yourself against the 3-hour limit.
- Write in English, as the question paper will be in English.
- Target well above 35%. The interview call depends on it, and the test carries 87.5% of the final merit.
- Revise diagrams and derivations for mechanics, thermodynamics, electrical and drawing topics.