ECIL Recruitment 2026 - Apply Online for 20 Technician, Supervisor and Other Posts

Electronics Corporation of India (ECIL)  has released an official notification for the recruitment of 20 Technician, Supervisor and Other Posts. Interested and eligible candidates can apply Online through the official ECIL website. The last date to submit the application form is 20-01-2026. In this article, you’ll find the ECIL Technician, Supervisor and Other Posts recruitment details, including eligibility criteria, age limit, salary structure, selection process, application steps, and direct links to the official notification and Online application form.

ECIL Technician, Supervisor, Draftsman Recruitment 2026 Overview

ECIL Technician, Supervisor, Draftsman Recruitment 2026 Vacancy Details

Reservation Details:

• Technician-C Posts: 5-UR, 1-EWS, 4-OBC, 2-SC, 1-ST
• Supervisor-C Posts: 3-UR, 2-OBC, 1-SC, 1-ST

Eligibility Criteria

1. Technician on Contract (CNC Operator - Machinist)

• Qualification: ITI (Machinist) with at least 60% aggregate marks
• Experience: 5 Years for ITI(Machinist) OR 3 Years for ITI CNC Machine Technician with the qualification CNC Machining Technician (NSQF) - a 2-year program in operating CNC Milling Machines/Turn Mill Centres
• Desirable: Candidates who have completed a certification course in CNC Machine Operation of at least 6 months duration will have an added advantage

2. Technician on Contract (CNC Operator - Turner)

• Qualification: ITI (Turner) with at least 60% aggregate marks
• Experience: 5 Years for ITI(Turner) OR 3 Years for ITI CNC Machine Technician with the qualification CNC Machining Technician (NSQF) - a 2-year program in operating CNC Turning Machines/Turn Mill Centres
• Desirable: Candidates who have completed a certification course in CNC Machine Operation of at least 6 months duration will have an added advantage

3. Technician on Contract (CNC Operator - Grinding)

• Qualification: ITI (Machinist (Grinding)) with at least 60% aggregate marks
• Experience: 5 Years for ITI(Machinist(Grinding)) OR 3 Years for ITI CNC Machine Technician with the qualification CNC Machining Technician (NSQF) - a 2-year program in operating CNC Turning Machines/Turn Mill Centres
• Desirable: Candidates who have completed a certification course in CNC Machine Operation of at least 6 months duration will have an added advantage

4. Technician on Contract (Jig Boring Machine Operator)

• Qualification: ITI (Machinist) with at least 60% aggregate marks
• Experience: 5 Years' experience in operating a Jig Boring Machine

5. Technician on Contract (CMM Operator)

• Qualification: ITI (Fitter/Machinist/Turner) with at least 60% aggregate marks
• Experience: 5 Years' experience in operating CMM machines
• Essential: The candidate should have completed a certification course in CMM operation. Sound knowledge of reading and interpreting tolerances, including GD&T, is essential

6. Technician on Contract (Operator - Welder)

• Qualification: ITI (Welder) with at least 60% aggregate marks
• Experience: 5 Years' experience in welding Mild Steel, Structural Steel & Stainless Steel Structures
• Desirable: Experience in fabrication work in Aerospace/Nuclear/Defence sectors; Completion of a certification course in welding or weld inspection; Experience in operating automated welding equipment

7. Supervisor on Contract (CNC Programming)

• Qualification: Diploma in Mechanical/Production Engineering with at least 60% aggregate marks
• Experience: 5 Years' experience in CNC Programming. Should be capable of programming various types of CNC machines and have capability in planning shop floor activities efficiently
• Desirable: Candidates who have completed a certificate course in CNC Programming will have an added advantage

8. Supervisor on Contract (Maintenance)

• Qualification: Diploma in Electrical Engineering with at least 60% aggregate marks
• Experience: 5 Years' experience in the maintenance of CNC machines

9. Draftsman Supervisor (3D Modelling and Drafting)

• Qualification: Diploma in Mechanical Engineering with at least 60% aggregate marks
• Experience: 5 Years' experience in 3D Modelling and Drafting
• Essential: Knowledge of various modelling and drafting software packages is essential. The candidate should be able to read and interpret engineering drawings and must have strong proficiency in tolerance and GD&T
• Desirable: Candidates who have completed a certificate course in CAD/CAM will have an added advantage

Note: Apprenticeship in the relevant field (maximum of one year) is also considered as experience.

Salary/Stipend

Technician on Contract

• 1st Year: ₹30,000 per month
• 2nd Year: ₹32,000 per month
• 3rd Year: ₹34,000 per month
• 4th Year: ₹36,000 per month

Supervisor on Contract

• 1st Year: ₹35,000 per month
• 2nd Year: ₹37,000 per month
• 3rd Year: ₹39,000 per month
• 4th Year: ₹41,000 per month

Additional Benefits

• Reimbursement of premium paid towards Medical Insurance
• Company PF (Provident Fund)
• TA/DA (while on official duty)
• Paid Leave as per extant rules

Contract Period: Initial period of One year (extendable up to 4 years including initial term, depending on project requirements & satisfactory performance of the candidate)

Age Limit (as on 31.12.2025)

• Maximum Age for UR Category: 35 years
• Age Relaxation for OBC: 3 years (up to 38 years)
• Age Relaxation for SC/ST: 5 years (up to 40 years)
• Age Relaxation for PwBD: 10 years in addition to the relaxation applicable to the categories mentioned above (minimum 40% disability or more)
• Age Relaxation for J&K Domicile: 5 years for candidates who had ordinarily been domiciled in the State of Jammu & Kashmir from 01/01/1980 to 31/12/1989

Application Fee

• Application Fee: Nil (No application fee required for any category)

Important Dates

Selection Process

• Based on data provided in online application, candidates shall be shortlisted in the ratio of 1:4 in order of merit based on aggregate percentage obtained in ITI/Diploma, category wise (UR/EWS/OBC/SC/ST)
• In case of a tie, candidates with higher marks in Class X standard shall be considered
• In case of a further tie, candidates with earlier date of Birth shall be considered
• Upon short listing, candidates will be called for Document verification followed by Written Test and Skill/Trade Test with Viva to be held at Hyderabad
• Final recommendations shall be made as per the merit through following criteria:
  • Qualification (A): 20% of aggregate percentage in Diploma/ITI
  • Written Test (B): 40 marks
  • Trade/Skill Test + Viva (C): 40 marks
  • Total Merit: A + B + C
• Experience from Academic Institutions/Colleges/Internship/Project work shall not be considered for the purpose of calculation of Post-Qualification experience

General Information/Instructions

• This is a purely fixed tenure contract basis appointment for an initial period of One year
• Contract is extendable up to 4 years including initial term, depending on project requirements & satisfactory performance
• Posts are for various Business verticals located in Hyderabad
• ECIL is a leading Miniratna (Category-I) Public Sector Enterprise under Department of Atomic Energy, Govt. of India
• Reservations & Relaxations for EWS/OBC (NCL)/SC/ST/PwD/Ex. SM will be as per Presidential directives
• Aggregate percentage in Primary Qualification of 60% is relaxed to 50% for SC/ST candidates subject to availability of such reserved posts
• Candidate should read the complete advertisement carefully and ensure that he/she has fulfilled the eligibility criteria
• Candidate should apply for one category of post only, applying to multiple posts is not allowed
• Candidates should be ready to work anywhere in India as per the need/organization requirements
• Candidates already working with ECIL must obtain permission letter from respective Head of Division
• Company reserves the right to alter the no. of posts or cancel the whole process of recruitment without assigning any reason
• All qualifications should be from a recognized Indian University/Institution recognized by appropriate Statutory Authority
• The application is liable for rejection at any stage in case of suppression of facts/furnishing of false information
• Decision of ECIL in all matters regarding eligibility, place of posting, and stages of scrutiny will be final and binding
• Legal proceeding can be instituted only at Courts at GHMC (Kapra Circle) which shall have exclusive jurisdiction
• Canvassing in any form will result in immediate rejection of application
• Only Indian nationals are eligible
• Beware of unscrupulous elements - selection will be done on the basis of merit only in a transparent manner
• Corrigendum, if any shall be published only on official website

How to Apply

• Eligible candidates have to apply online by visiting the official website www.ecil.co.in
• Navigate to: Main Page > Careers > Current Job Openings
• The online application process is operational from 06/01/2026 (14:00 hrs) to 20/01/2026 (14:00 hrs)
• Candidate should furnish actual information while filling online application form
• Must produce supporting documents during verification (personal, academic & professional credentials)
• Failure to produce documents will result in rejection at any stage of recruitment process
• After applying online & successful registration, take the print of registered online application form and retain for future reference
• Candidate can take re-print of his/her registered online application form before the last date
• After closing the registration process & shortlisting, an email correspondence will be sent to eligible candidates
• Selected candidates will be advised to attend Document Verification at Hyderabad
• No other mode of application will be accepted

ECIL Technician, Supervisor and Other Important Links

• Apply Online: Click here
• Official Notification PDF: Click here
• Official Website: Click here 
• Join Arattai Channel: Click Here
• Join Telegram Channel: Click Here
• Join WhatsApp Channel: Click Here
• Sarkari Result: Click Here
• Download Mobile App: Click Here