HAL Korwa Apprentice Recruitment 2026: Hindustan Aeronautics Limited (HAL), Avionics Division, Korwa, Amethi, has released a notification dated 29 October 2026 inviting applications for Engineering Graduate, Non-Engineering Graduate, Technician (Engineering Diploma) and Technician (Non-Engineering Diploma) Apprentices for 2026-27. Candidates with the prescribed B.E./B.Tech., BCA, B.Sc., B.Com, BA, Engineering Diploma, GNM or MOM&SP qualifications can apply, subject to eligibility conditions. The maximum age is 26 years for General candidates, with applicable relaxation. Online applications must be submitted through the prescribed Google Form by 13 November 2026.
HAL Korwa Apprentice Recruitment 2026 - Overview
| Organization | Hindustan Aeronautics Limited (HAL) |
|---|---|
| Division | Avionics Division, Korwa, Amethi |
| Notification Reference | T/665/8/2026-27 |
| Notification Date | 29 October 2026 |
| Training Categories | Engineering Graduate, Non-Engineering Graduate, Engineering Diploma and Non-Engineering Diploma Apprentices |
| Total Vacancies | Not Specified in Notification |
| Qualification | Relevant Bachelor's Degree or Diploma |
| Maximum Age | 26 Years for General Candidates as on 13 November 2026 |
| Stipend | As per Applicable Rules / BOAT Kanpur Rates |
| Training Duration | 1 Year |
| Application Mode | Online - Google Application Form |
| NATS Registration | Required |
| Application Last Date | 13 November 2026 |
| Selection Process | Merit Based on Qualifying Examination Marks and Document Verification |
| Training Location | HAL Avionics Division, Korwa, Amethi, Uttar Pradesh |
| Official Website | hal-india.co.in |
Important: This notification is for one-year apprenticeship training under the Apprentices Act, 1961, and not for permanent employment. Candidates with previous apprenticeship training, one year or more of work experience or correspondence qualifications are ineligible under the stated conditions.
HAL Korwa Apprentice Recruitment 2026 Important Dates
| Event | Date |
|---|---|
| Notification Release Date | 29 October 2026 |
| Online Application Start Date | 29 October 2026 |
| Last Date to Apply Online | 13 November 2026 |
| Provisional Selection List | 30 November to 2 December 2026 |
| Document Verification at HAL Korwa | 3 December to 9 December 2026 |
The provisional selection list will be published in the Careers section of the HAL website. The company reserves the right to revise the selection schedule, and any changes will be published on its website.
HAL Korwa Apprentice Vacancy 2026
HAL Korwa has invited applications for four apprenticeship categories. The official advertisement lists the eligible disciplines but does not provide the number of training slots for individual branches or the overall recruitment.
| S. No. | Apprenticeship Category | Vacancies |
|---|---|---|
| 1 | Engineering Graduate Apprentice | Not Specified |
| 2 | Non-Engineering Graduate Apprentice | Not Specified |
| 3 | Technician - Engineering Diploma Apprentice | Not Specified |
| 4 | Technician - Non-Engineering Diploma Apprentice | Not Specified |
| Total | Not Specified | |
Reservation will be provided according to the Apprentices Act, 1961. The notification does not specify a separate category-wise seat distribution.
HAL Korwa Apprentice Recruitment 2026 Notification PDF
Hindustan Aeronautics Limited, Avionics Division, Korwa, issued the Graduate and Diploma Apprenticeship 2026-27 advertisement on 29 October 2026 under reference No. T/665/8/2026-27.
The five-page official notification includes all eligible degree and diploma disciplines, age relaxation provisions, application instructions, apprenticeship exclusions, selection method and document verification requirements.
Official Notification PDF: Download HAL Korwa Apprentice Recruitment 2026 Notification PDF
HAL Korwa Apprentice Recruitment 2026 Eligibility Criteria
Candidates must possess a recognized degree or diploma in one of the notified disciplines and satisfy the age, qualification age, previous apprenticeship and work-experience conditions.
Engineering Graduate Apprentice Qualification
Applicants must possess a four-year B.E. or B.Tech. degree from a recognized university or institution in the relevant engineering branch.
| S. No. | Engineering Branch | Qualification |
|---|---|---|
| 1 | Electronics Engineering, including Allied Branches | 4-Year B.E./B.Tech. |
| 2 | Mechanical Engineering, including Allied Branches | 4-Year B.E./B.Tech. |
| 3 | Electrical Engineering | 4-Year B.E./B.Tech. |
| 4 | Civil Engineering | 4-Year B.E./B.Tech. |
| 5 | Computer Science / Information Technology | 4-Year B.E./B.Tech. |
Non-Engineering Graduate Apprentice Qualification
| Degree / Discipline | Qualification |
|---|---|
| BCA / B.Sc. Computer Science | 3-Year Degree in the Relevant Discipline |
| B.Com | 3-Year Bachelor of Commerce Degree |
| BA | 3-Year Bachelor of Arts Degree |
| B.Sc. Agriculture | 4-Year Bachelor of Science in Agriculture |
Technician (Engineering Diploma) Apprentice Qualification
Candidates must have completed a three-year Engineering Diploma in one of the specified branches from a recognized board or university.
| S. No. | Diploma Branch | Qualification |
|---|---|---|
| 1 | Electronics Engineering, including Allied Branches | 3-Year Diploma |
| 2 | Mechanical Engineering, including Allied Branches | 3-Year Diploma |
| 3 | Electrical Engineering | 3-Year Diploma |
| 4 | Civil Engineering | 3-Year Diploma |
| 5 | Computer Science / Information Technology | 3-Year Diploma |
Technician (Non-Engineering Diploma) Apprentice Qualification
| Discipline | Qualification |
|---|---|
| General Nursing Midwifery (GNM) | 3-Year GNM Diploma from a Recognized Board or University |
| MOM&SP | 2-Year Diploma in MOM&SP from a Recognized Board or University |
Important Eligibility Restrictions
The following candidates are not eligible for HAL Korwa Apprentice Recruitment 2026 under the conditions specified in the advertisement:
- Candidates who have completed, resigned from, terminated or are currently undergoing apprenticeship training at any organization, or are registered under the Apprentices Act.
- Candidates whose degree or diploma will have completed five years since passing as on 15 February 2027.
- Candidates with one year or more of work experience in any organization.
- Candidates who completed a technical or general degree/diploma through correspondence mode.
Important: The five-year restriction is calculated using 15 February 2027, not the online application closing date. Candidates should verify their qualification passing date before applying.
HAL Korwa Apprentice Age Limit 2026
The maximum age limit is 26 years for General candidates as on 13 November 2026. Eligible OBC, SC, ST and Persons with Disabilities candidates receive relaxation under the notified rules.
| Category | Maximum Age |
|---|---|
| General | 26 Years |
| OBC | 29 Years |
| SC / ST | 31 Years |
| PwBD - General (Minimum 40% Disability) | 36 Years |
| PwBD - OBC | 39 Years |
| PwBD - SC / ST | 41 Years |
The notification does not separately state a minimum age limit. Applicants must meet the prescribed upper-age requirement and all other eligibility conditions.
HAL Korwa Apprentice Stipend 2026
Selected apprentices will receive a monthly stipend as per applicable apprenticeship rules or rates revised by the Board of Apprenticeship Training (BOAT), Kanpur.
| Particulars | Details |
|---|---|
| Payment | Monthly Stipend |
| Stipend Rate | As per Applicable Rules / BOAT Kanpur Rates |
| Training Duration | 1 Year |
| Employment Type | Apprenticeship Training |
The official advertisement does not specify a fixed rupee stipend for each apprenticeship category. Candidates should not treat the stipend as a regular HAL employee salary.
HAL Korwa Apprentice Recruitment 2026 Application Fee
The notification dated 29 October 2026 does not specify an application fee or separate payment procedure. Applicants should follow the instructions displayed on the official Google Application Form.
HAL Korwa Apprentice Selection Process 2026
HAL will select apprentices on a 100% merit basis using aggregate marks obtained in the relevant qualifying degree or diploma examination.
- Scrutiny of online applications and prescribed eligibility conditions.
- Preparation of merit lists based on 100% weightage of aggregate qualifying examination marks.
- Publication of the provisional selection list on the HAL Careers website.
- Verification of original documents of provisionally selected candidates.
- Submission of medical fitness and police verification certificates before joining.
The notification does not prescribe a separate written examination or interview for merit preparation.
HAL Korwa Apprentice Merit List 2026
The provisional selection list is scheduled to be published between 30 November and 2 December 2026 in the Careers section of the official HAL website.
The selected candidates must attend original document verification at HAL Korwa between 3 and 9 December 2026, according to the notified schedule.
HAL Korwa Apprentice Apply Online 2026
Eligible candidates must register through the National Apprenticeship Training Scheme (NATS) portal and submit their applications using the Google Form specified in the HAL notification.
NATS Registration: nats.education.gov.in
Apply Online: HAL Korwa Apprentice Google Application Form
Application Last Date: 13 November 2026.
The advertisement requires applicants to mention their NATS registration number in the Google Application Form. Applications sent through any other mode will not be accepted.
How to Apply Online for HAL Korwa Apprentice Recruitment 2026?
- Visit the official HAL website at hal-india.co.in.
- Open the Careers section and locate the Graduate and Diploma Apprentices 2026-27 advertisement for HAL Avionics Division, Korwa.
- Read the educational qualification, age limit and eligibility restrictions carefully.
- Visit nats.education.gov.in and complete NATS registration to obtain the registration number.
- Open the official Google Application Form provided in the advertisement.
- Enter the personal details, apprenticeship category, educational qualifications, aggregate marks and NATS registration number requested in the form.
- Provide any additional details and supporting documents required by the Google Form.
- Dependents of serving, retired or deceased HAL employees claiming the applicable consideration must attach the prescribed employee details certified by the concerned HAL HR Officer.
- Review all entered information carefully.
- Submit the Google Application Form by 13 November 2026.
- Check the HAL Careers website for the provisional selection list and verification schedule.
Important: Incomplete or incorrectly filled applications may be rejected. Applications submitted through email, post or any mode other than the prescribed Google Form will not be accepted.
Documents Required for HAL Korwa Apprentice Recruitment 2026
Provisionally selected candidates must produce the original documents and self-attested copies during verification, along with one recent passport-size photograph.
| Document | Requirement |
|---|---|
| High School Certificate and Marksheet | Required |
| Degree / Diploma Certificate | Relevant Qualification |
| All Semester Marksheets | Required |
| SC / ST / OBC Certificate | If Applicable |
| EWS Certificate | If Applicable |
| PwBD Certificate | If Applicable |
| HR-Certified HAL Employee Dependent Proforma | If Applicable |
| Aadhaar Card | Required |
| Email Copy of NATS Registration Number | Required |
| Recent Passport-Size Photograph | One Photograph |
Medical Fitness and Police Verification
Provisionally selected candidates must submit the following certificates at the time of joining apprenticeship training:
- Medical Fitness Certificate: Issued by a Government Medical Officer not below the rank of Assistant Surgeon (Gazetted).
- Police Verification Certificate: Obtained from the Commissioner or Superintendent of Police of the candidate's place of residence.
Original documents must be produced during verification and at joining as required by HAL.
OBC and PwBD Certificate Conditions
OBC candidates must produce a valid Non-Creamy Layer certificate in the prescribed Central Government format, issued within six months of the application closing date.
PwBD candidates must possess a valid certificate from the competent authority showing at least 40% disability. The advertisement also specifies a six-month issuance requirement for the PwBD certificate.
HAL Korwa Apprentice Training Duration 2026
The apprenticeship training period is one year under the Apprentices Act, 1961. Selected candidates will be required to execute an apprenticeship training contract.
After completion of training, the apprenticeship contract will close. HAL has no obligation to offer temporary or permanent employment to candidates who complete the training.
HAL Korwa Apprentice Recruitment 2026 Important Instructions
- Applications must be submitted through the prescribed Google Form only.
- NATS registration number must be mentioned in the application.
- Applications close on 13 November 2026.
- Candidates with previous or ongoing apprenticeship training are ineligible under the notified conditions.
- Candidates with one year or more of work experience cannot apply.
- Correspondence degree or diploma qualifications are not accepted.
- The five-year qualification passing restriction is assessed as on 15 February 2027.
- Selection is based on 100% aggregate qualifying examination marks.
- Provisional selection does not remove the requirement for original document verification.
- No TA/DA will be paid for attending document verification.
- Candidates must arrange their own accommodation if required during verification.
- HAL may revise the selection schedule or cancel the advertisement according to its notified conditions.
HAL Korwa Apprentice Recruitment 2026 Important Links
| Link Description | Link |
|---|---|
| Apply Online - Google Form | Click Here |
| NATS Registration | Click Here |
| Official Notification PDF | Click Here |
| HAL Careers / Official Website | Click Here |
