Fluid Control Research Institute (FCRI) has announced FCRI Walk-In Interview 2026 for Trainee Graduate Engineers (Level‑1 & Level‑2) in Civil, Mechanical, Electrical and Instrumentation disciplines and for ITI/NCVT trades including Machinist, Fitter, Welder, Plumber, Electrician and AC & Refrigeration on a 1‑year tenure basis, likely to be extended. Engineering graduates with first‑class degrees and ITI/NCVT certificate holders with prescribed marks can attend FCRI Walk‑In Interviews 2026 at the Administration Block on specified March–April dates or submit their applications by email to [email protected].
FCRI Walk-In Interview 2026 – Overview
| Recruitment Name | FCRI Walk-In Interview 2026 for Trainee Graduate Engineers & ITI/NCVT Trades |
| Organization | Fluid Control Research Institute (FCRI) |
| Notification Titles | Walk-In Interview (April 2026): Graduate Engineer Level-1 & Level-2; Walk-In Interview (March 2026): ITI/NCVT |
| Posts (Graduate) | Trainee Graduate Engineers Level-1 & Level-2 – Civil, Mechanical, Electrical, Instrumentation |
| Posts (ITI) | ITI/NCVT Level-1 & Level-2 – Machinist, Fitter, Welder, Plumber, Electrician, AC & Refrigeration |
| Tenure | 1 year (likely to be extended) |
| Stipend (Graduate) | Level-2: Rs. 25,000/-; Level-1: Rs. 21,000/- or 1-year Apprentice Training with Rs. 12,900/- |
| Stipend (ITI/NCVT) | Level-2: Rs. 17,500/- + dormitory (subject to availability); Level-1: Rs. 16,500/- or 1-year Apprentice Training with Rs. 9,600/- |
| Job Location | Fluid Control Research Institute (FCRI), Administration Block (as per notification) |
| Selection Mode | Walk-In Interview (and written test/interview later for some Graduate Level‑1 candidates) |
| Application Mode | Walk-in with filled application form and documents / Email application to [email protected] |
| Official Website | www.fcriindia.com/ |
FCRI Vacancy Details 2026
| Category | Trades / Disciplines | Level |
|---|---|---|
| ITI/NCVT Trades | Machinist, Fitter, Welder, Plumber, Electrician, AC & Refrigeration | Level-2 |
| ITI/NCVT Trades | Same trades | Level-1 |
| Graduate Engineers | Civil, Mechanical, Electrical & Instrumentation | Level-2 |
| Graduate Engineers | Same disciplines | Level-1 |
Eligibility Criteria – FCRI Walk-In Interview 2026
1) Trainee Graduate Engineers (Level‑1 & Level‑2) – Civil / Mechanical / Electrical / Instrumentation
-
Educational Qualification
-
Full‑time degree in Engineering (B.E./B.Tech) in relevant discipline (Civil / Mechanical / Electrical / Instrumentation / Electrical Sciences).
-
Degree must be from UGC/AICTE‑recognized Universities/Institutions.
-
Either 4‑year regular bachelor’s degree programme, or Engineering degree through lateral entry after full‑time Engineering Diploma in relevant discipline from recognized Polytechnic.
-
Minimum First Class with 60% or more aggregate in qualifying degree (and in diploma, if applicable).
-
-
Experience
-
Level‑2:
-
Minimum 1 year experience in relevant areas as specified for each discipline (Mechanical, Civil, Electrical, Instrumentation/Electrical Sciences) – e.g. calibration/testing, construction & maintenance, O&M of substations, calibration of electro‑technical parameters, etc.
-
-
Level‑1:
-
Less than 1 year experience in relevant areas, including candidates with at least 2 months of relevant internship / practical exposure.
-
-
2) ITI/NCVT Trades (Level‑1 & Level‑2) – Machinist / Fitter / Welder / Plumber / Electrician / AC & Refrigeration
-
Educational Qualification
-
ITI with NCVT in relevant trade: Machinist, Fitter, Welder, Plumber, Electrician, AC & Refrigeration.
-
Minimum 55% marks or more in ITI/NCVT.
-
-
Experience
-
Level‑1:
-
Freshers or candidates with less than 1 year experience in relevant trade areas (shop floor, fabrication, installation/maintenance, troubleshooting, etc.).
-
-
Level‑2:
-
Minimum 1 year experience in relevant trade areas as described (workshop/machining, plumbing & piping systems, electrical fault rectification, AC & refrigeration systems, etc.).
-
-
No explicit upper age limit is mentioned in these walk‑in notifications; selection is primarily based on qualification, relevant experience and performance in the walk‑in interview / test.
FCRI Vacancy Details 2026
| Trades / Disciplines | Level | Remuneration |
|---|---|---|
| Machinist, Fitter, Welder, Plumber, Electrician, AC & Refrigeration | Level-2 | ₹17,500 consolidated + dorm |
| Same trades | Level-1 | Trainee ₹16,500 or Apprentice ₹9,600 |
| Civil, Mechanical, Electrical & Instrumentation | Level-2 | ₹25,000 consolidated |
| Same disciplines | Level-1 | Trainee ₹21,000 or Apprentice ₹12,900 |
FCRI Walk-In Interview 2026 – Important Dates
| FCRI Walk-In Interview 2026 for Graduate Engineers Dates | 30 March 2026 and 06 April 2026 |
| Graduate Engineer Walk-In Interview Timings | 10:30 to 13:00 hours and 14:00 to 15:00 hours |
| FCRI Walk-In Interview 2026 for ITI/NCVT Trades Dates | All working days during March 2026 |
| ITI/NCVT Walk-In Interview Timings | 10:00 to 13:00 hours |
| Walk-In Interview Venue | Administration Block, Fluid Control Research Institute (FCRI) |
| Last Date to Email Graduate Engineer Applications | Before completion of Walk-In rounds (as per institute schedule) |
| Last Date to Email ITI/NCVT Applications | Within March 2026 (for candidates not attending walk-in) |
How to Apply
- Walk-In: Report at Administration Block with filled application form (available at P&A Dept) + self-attested copies of certificates.
- Email Option: Send resume to [email protected] with subject “Walk-In Interview (March 2026): ITI/NCVT” or “Walk-In Interview (April 2026): Graduate Engineer Level-1 & Level-2”.
- Mention in email: Trade/Discipline, Name, Date of Birth, Relevant Experience, Date of Qualifying ITI/Graduation.
FCRI Walk-In Interview 2026 - Important Links
| Notification | Click here |
| Official Website | Click here |
| Join Arattai Channel | Click Here |
| Sarkari Result | Click Here |
| Join Telegram Channel | Click Here |
| Download Mobile App | Click Here |
| Join WhatsApp Channel | Click Here |
